Brass Tube Weight Calculator

Brass Tube Weight Formula:

\[ Weight = \pi \times \left(\left(\frac{Outer\ Diameter}{2}\right)^2 - \left(\frac{Inner\ Diameter}{2}\right)^2\right) \times Length \times Density \]

Outer Diameter:

Inner Diameter:

Length:

Density:

kg/m³

Calculated Weight:

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is the Brass Tube Weight Formula?

The Brass Tube Weight Formula calculates the weight of a brass tube using its dimensions (outer diameter, inner diameter, length) and the density of brass. It's essential for material estimation, shipping calculations, and structural planning.

2. How Does the Calculator Work?

The calculator uses the following formula:

\[ Weight = \pi \times \left(\left(\frac{Outer\ Diameter}{2}\right)^2 - \left(\frac{Inner\ Diameter}{2}\right)^2\right) \times Length \times Density \]

Where:

\( Outer\ Diameter \) — Outer diameter of the tube (mm)
\( Inner\ Diameter \) — Inner diameter of the tube (mm)
\( Length \) — Length of the tube (m)
\( Density \) — Density of brass (kg/m³, typically 8500 kg/m³)

Explanation: The formula calculates the cross-sectional area of the tube wall, multiplies by length to get volume, then multiplies by density to get weight.

3. Importance of Accurate Weight Calculation

Details: Accurate weight calculation is crucial for material procurement, structural design, shipping costs estimation, and load-bearing calculations in construction and engineering projects.

4. Using the Calculator

Tips: Enter all dimensions in consistent units (mm for diameters, m for length). Default brass density is 8500 kg/m³ but can be adjusted for different brass alloys.

5. Frequently Asked Questions (FAQ)

Q1: What's the typical density of brass?
A: Common brass density ranges from 8400-8700 kg/m³, with 8500 kg/m³ being a standard value for calculations.

Q2: Can I use this for other tube materials?
A: Yes, by changing the density value, you can calculate weight for tubes made of other materials like copper or aluminum.

Q3: How precise should my measurements be?
A: For most applications, measurements to 0.1mm precision are sufficient, but critical applications may require higher precision.

Q4: Does this account for tube wall thickness variations?
A: No, this assumes uniform wall thickness. For tubes with variable thickness, more complex calculations are needed.

Q5: How does temperature affect the calculation?
A: Brass expands with heat, but for most applications at stable temperatures, this effect can be ignored.